Shiplap - one of the hottest trends of late - is available in our custom milled pattern. Our custom pattern gives you the look of shiplap with a perfect 1/8" gap in between each board to give you the desired "nickel gap" effect.
Our shiplap is available in a raw knotty pine, a clear Douglas Fir, and a paint-ready primed product.
Raw Pine Shiplap:
See how our Raw Pine Shiplap was used in place of drywall for a stunning pool house:
240 LF per 100 square feet
Available Finishes: Raw Knotty Pine, Clear Douglas Fir & Pre-Primed Radiata
6 ¾" Exposure
180 LF per 100 square feet
Available Finishes: Raw Knotty Pine & Pre-Primed Radiata
1x6 Raw Pine
1x8 Primed Radiata
I've been looking for shiplap everywhere, how do I know this is the right one?
We did a lot of research and worked directly with the mills to create a custom milled pattern that perfectly fits customer needs. At the end of the day, we identified that the most important features were the following:
1) A 1/8" nickel gap reveal
3) Carpenter friendly and workability
4) Long lengths up to 16'
5) Ability to take different paints, stains, and washes
Taking all of those needs, we were able to create two products that are perfect for any job.
How much does this cost?
Pricing depends on finish and volume.
Raw Pine Shiplap: Generally speaking large jobs (1000 square feet +) will retail for roughly $2.00/square foot, and smaller jobs will retail for about $2.30/square foot.
Pre-Primed Shiplap: Large jobs (1000 square feet +) will retail for roughly $2.75/square foot, and smaller jobs will retail for about $3.00/square foot.
How much of this has been sold and used?
Over ten MILLION linear feet of our shiplap has been installed since 2016.
Is this raw pine, or is it pre-primed or pre-painted?
We have both a raw pine shiplap and a pre-primed paint ready shiplap. Our raw pine product is an extremely high-quality knotty pine that can be painted, stained, or whitewashed. It has natural wood characteristics like grain, color variation, and knots. Our pre-primed paint ready product is double primed and easy to paint.
What size shiplap should I use?
The most common seller is the 1x8, and this really works best for larger rooms, hallways, and ceilings. The 1x6 is a smaller reveal, so it looks best in tighter areas such as bathrooms, mud rooms, and laundry rooms.
Can I install this directly to the studs and skip the drywall step?
Yes, and it's fast and easy! Installed shiplap will cost you roughly the same as installed drywall. However certain municipalities still require sheet rock per local building code.
Can I install this directly over my drywall?
Absolutely, but you'll still want to fasten to the studs where possible, and you'll need to be careful of your interior window and door trim. Make sure you plan ahead and evaluate your current door and window trim. Our shiplap is 3/4" thick, so you could lose your shadow line if you have a thin reveal on your current trim.
I want a crisp white look, how should I paint my shiplap to achieve this look?
If you are using our pre-primed shiplap, just finish with two coats of a high-quality acrylic latex paint.
If using our raw pine shiplap, it's best to apply a shellac based primer. We recommend Kilz Wood Primer or Zinnser B-I-N, they're the absolute best. If necessary, use wood filler on any knots, voids, or nail holes along the boards. Let the wood filler dry, and then sand the face of the board to achieve a level surface. Finally, apply two coats of a high-quality acrylic latex paint, and enjoy a beautiful crisp white wall. See the video below to learn more about painting knotty pine.
How to Order Shiplap
We have a dedicated dealer network that serves the following states:
Oklahoma, Kansas, Nebraska, Iowa, Missouri, Illinois, Indiana, Kentucky, Ohio
Steps for ordering Shiplap:
1) Fill out our contact form below
2) We will coordinate with your closest dealer who will provide pricing, lead time, and samples
3) If product and price are right for your job, material will be ordered and delivered to you within 2-5 days
4) Enjoy your amazing new Shiplap look, and tell your friends where you got it!
Sample Painted Projects:
Whitewashed & Stained Projects:
Clear Douglas Fir Projects:
-When fastening, you have two options. You can A) use your finish nails and fasten through the tongue, as shown below (this nail head will then get covered when you paint). Or B) you can face nail into the studs. It's recommended to fill face nailed heads with wood filler before painting.
Accessories & Tools Needed:
Installing T&G Wood Paneling on a Ceiling
Painting T&G Wood Paneling
Installed Photo Reel